UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: N0111

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2009-09-21 20:15	ALL	ALL		redeployed by R/V Argo Maine
2009-09-21 21:00	sbe37	conductivity	50	Conductivity sensor flagged as invalid (erratic and low)
2009-11-02 12:00	sbe37	ALL	20	Last data received from 20m microcat.
2009-11-09 13:00	sbe37	ALL	20	Reset clock on microcat; data being received once again.
2009-12-01 00:00	sbe37	ALL	20	SBE37 not taking new samples - no new data being received.
2009-12-02 13:10	sbe37	ALL	20	Restarted sampling on SBE37; data appears OK once again.
2010-08-01 12:30	ALL	ALL		Recovered by R/V Argo Maine.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).