GoMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for GoMOOS Mooring: N0106

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2006-09-16 20:35	ALL	ALL		Redeployed by R/V Argo Maine.
2006-12-03 15:00	aanderaa	ALL	2	Last data received from 2m surface current meter.
2007-02-06 01:30	met	barometric_pressure	-3	Barometric pressure flagged as invalid (pressure port frozen)
2007-02-08 08:00	met	wind_speed, wind_gust	-4	Wind gust readings from backup RMYoung wind sensor too high; flagged as invalid.
2007-02-10 08:00	ALL	ALL	0	Battery voltage dropped below 11.5 volts putting buoy in low-power mode: 1 irridium call per day, short Goes message every 3 hrs (no sonic readings in short Goes, so no valid winds sent in Goes).
2007-02-26 20:00	ALL	ALL	0	Battery has recharged and buoy has resumed normal communications/sampling.
2007-03-06 23:00	met	wind_speed, wind_gust, wind_direction	-4	Last data received from RMYoung wind sensor. Wind data from sonic aneometer working okay.
2007-03-26 12:10	ALL	ALL		Mooring N0106 Recovered By R/V Delaware II

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).