UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: M0130

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2020-11-08 20:50	ALL	ALL		Redeployed by R/V Connecticut
2020-11-08 20:51	ALL	ALL		unable to dial in to iridium modem. Modem will not answer. Can connect occasionally at end of callback session before hangup
2020-11-11 18:33	sbe37		1	1m SM becoming intermittent
2020-11-19 15:33	sbe37		1	last data received from 1m SM ause unknown, can't communicate with buoy
2020-12-04 00:54	ALL	ALL		SUNAs and IMS begin missing data and becoring badly intermittent. Some noise and corruption.
2021-03-24 20:00	ALL	ALL	0	Buoy is no longer anchored, slowly moving with all subsurface instruments still reporting. Data flagged as off-station.
2021-04-09 14:00	ALL	ALL		Buoy intercepted by R/V Determination Marine. Subsurface instruments recovered from wire and buoy was towed back to SW Harbor
2021-04-24 15:00	sbe37	ALL	1	Post-recovery processing completed for 1m SBE37SM2351. Data OK.
2021-04-24 15:01	sbe37	ALL	10	Post-recovery processing completed for 10m SBE37IMP 16166. Data missing every 220th record (new firmware download issue).
2021-04-24 15:02	sbe37	ALL	20	Post-recovery processing completed for 20m SBE37IM 1920. Data OK.
2021-04-24 15:03	sbe37	ALL	50	Post-recovery processing completed for 50m SBE37IM 1922. Data ends early 2021-02-02.
2021-04-24 15:04	sbe37	ALL	100	Post-recovery processing completed for 100m SBE37IM 1923. Data OK.
2021-04-24 15:05	sbe37	ALL	250	Post-recovery processing completed for 250m SBE37IMP 12507. Data missing every 221st record (new firmware download issue).
2021-05-01 12:20	sbe37	ALL	150	Post-recovery processing completed for 150m SBE37IM. Data ended early with last data taken on 2021-02-18.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).