UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: M0122

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2013-06-23 16:34	ALL	ALL		Redeployed by R/V Connecticut.
2013-10-14 21:00	sbe37	ALL	250	Data from 250m SBE37IMP becoming intermittent.
2013-12-04 04:45	isus	All	100	Last data received from 100m ISUS/SBE44 (battery?)
2013-12-16 18:00	sbe37	ALL	0	Last data received from SBE37IM sensors (20m through 250m). Talk-through to the data logger indicated problem with SIM in control box. Data from SBE37IMs should be available after mooring recovery.
2014-03-21 12:25	ALL	ALL	0	Last backup Goes transmission received from buoy. Since the primary Iridium system failed in Jan 2014, no data are presently being received from this site.
2014-05-06 16:15	ALL	ALL	0	Vist to buoy M01 by R/V Osprey. Considerable water found in well; battery failed. Removed control box; installed trackpack. Air, visibility and RMYoung had been damaged.
2014-05-31 11:30	ALL	ALL		Recovered by R/V Connecticut.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).