UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: I0130

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2015-06-05 17:45	ALL	ALL		Redeployed by R/V Connecticut.
2015-06-05 18:00	waves	ALL	0	No data from test directional wave sensor.
2015-06-05 20:00	aanderaa	temperature	2	Temperature flagged as invalid from the 2m surface current meter (erratic)
2015-06-06 00:00	aanderaa	ALL	2	Data very intermittent from 2m surface current meter
2015-06-24 10:30	aanderaa	ALL	0	Valid temperatures being received once again from 2m Aanderaa surface current meter.
2015-10-28 00:20	ALL	ALL	0	Directional wave sensor reporting valid data once again
2016-03-11 18:50	met	visibility	-3	Visibility sensor flagged due to low voltages, erratic readings
2016-07-03 12:00	met	visibility	-3	Visibility data appears valid again - sensor has been unflagged.
2016-10-09 12:05	ALL	ALL		Recovered by R/V PISCES. 20m IM sensor guard bent and sensor was pulled up the wire to just below the ICC (about 6m depth).

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).