UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: I0123

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2009-09-16 23:15	ALL	ALL		redeployed by R/V Argo Maine
2009-09-20 00:00	met	visibility	-3	Visibility readings appear low?
2009-10-02 03:40	met	visibility	-3	Visibility sensor swapped (also replaced ICC and IM cable). Data appear good after the swap.
2010-01-16 03:00	sbe37	ALL	50	Data from 50m microcat becoming somewhat intermittent.
2010-01-24 01:00	sbe37	ALL	20	Data from 20m microcat becoming somewhat intermittent.
2010-01-25 16:44	met	wind_2_speed, wind_2_direction, wind_2_gust	-4	Data from sonic anemometer flagged as invalid (no readings)
2010-06-08 18:55	ALL	ALL		Recovered by R/V Argo Maine.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).