UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: F0124

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2012-04-14 15:28	ALL	ALL		Redeployed by R/V Delaware II.
2012-05-23 09:00	goes	ALL	0	Last data received from backup Goes transmitter (problem with Goes GPS). Data from cellphone are okay.
2012-09-05 00:00	sbe37	conductivity	20	20m conductivity/salinity readings flagged as invalid (values are too low)
2012-12-12 18:15	sbe37	salinity	20	New 20m temperature/salinity sensor; salinity values are valid once again.
2013-01-25 22:00	goes	ALL	0	Last valid Goes transmission received - gps problem?
2013-04-22 04:00	sbe37	salinity	1	Last valid salinity data received from 1m SBE sensor; temperature readings still look good.
2013-04-24 15:30	sbe37	salinity	1	Salinity readings appear to be okay from 1m SBE37 (problem may have been cell obstruction)
2013-06-22 16:10	ALL	ALL		Recovered by R/V Connecticut.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).