UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: E0133

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
0000-00-00 00:00	sbe16	ALL	87	Last data received from 87m SBE16/transmissometer
2015-06-06 16:45	ALL	ALL		Redeployed by R/V Connecticut.
2015-11-03 08:00	suna	ALL	52	Data from 52m SUNA becoming intermittent
2016-01-12 00:00	met	visibility	-3	Visibility flagged as invalid (erratic, reads too low)
2016-01-25 15:15	suna	ALL	52	Data from 52m SUNA becoming extremely intermittent
2016-02-02 00:00	sbe16	chlorophyll	82	Chlorophyll readings too high
2016-03-20 12:00	doppler	ALL	3.2	Doppler voltage readings took suddent drop then recovered but readings appear noisy and erratic. Current data from mid-water bins starting to fail.
2016-03-31 08:00	sbe37	ALL	20	Inductive modem data becoming intermittent (problem with ICC, wire or SIM)
2016-07-08 21:05	ALL	ALL		recovered by R/V Connecticut
2016-07-09 00:00	ALL	ALL	0	Wire rope parted during recovery just below 20m IM; 50m IM, 51m SUNA, 87m SBE16+/trans and fish counter recovered 4 hrs later after successful grappling (some damage to brackets/mounts/inst).

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).