UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: E0121

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2007-09-18 11:45	ALL	ALL		Redeployed by R/V Argo Maine.
2007-11-13 00:00	sbe37	ALL	20	Data from 20m microcat becoming intermittent.
2007-11-13 00:00	sbe37	ALL	50	Data from 50m microcat becoming intermittent.
2007-12-04 13:50	met	wind_direction	-4	Secondary wind direction started to show offset from primary wind direction; flagged as invalid.
2007-12-31 05:00	ALL	ALL	0	Last cellphone and goes transmission received from the buoy.
2008-01-03 14:20	ALL	ALL	0	Communications with data logger reestablished and updated data are available once again.
2008-01-09 15:40	met	wind_speed,wind_gust	-4	Secondary RMYoung wind sensor flagged for invalid speed and gust readings (near zero).
2008-01-10 16:00	ALL	ALL	0	Data logger reset; cellphone and Goes transmissions restored (had locked up at 1100z 2008/01/10).
2008-01-14 21:00	ALL	ALL	0	Last cellphone/Goes transmission received from buoy (control box lockup).
2008-01-15 14:25	ALL	ALL	0	Communications with data logger reestablished and updated data are available once again.
2008-01-16 03:00	ALL	ALL	0	Last cellphone/Goes transmission received from buoy (control box lockup).
2008-01-16 12:15	ALL	ALL	0	Communications with data logger reestablished and updated data are available once again.
2008-02-04 22:10	optics_s	ALL	-3	Tower OCR sensor replaced.
2008-02-04 22:10	met	wind_direction	-4	Replaced by R/V Argo Maine.
2008-02-04 22:10	met	wind_speed,wind_gust	-4	Replaced by R/V Argo Maine.
2008-04-20 08:00	ALL	ALL		Recovered on Delaware II

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).