UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: B0128

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2016-07-08 13:15	ALL	ALL		Redeployed by R/V Connecticut
2016-11-19 00:00	met	visibility	-3	Visibility data flagged as invalid (too low)
2017-02-08 04:00	goes	AL	0	No Goes transmissions for 10 hours (possibly related to lower battery voltage).
2017-02-11 07:00	goes	AL	0	Last Goes transmission received (error shows time out waiting for response from transmitter)
2017-03-20 21:00	sbe37	ALL	20	Last data received from 20m IM (talkthrough attempts were unsuccessful).
2017-04-20 10:00	diagnostics	gps_lat,gps_lon	0	Last valid BAE GPS position received (same fix repeated since this time)
2017-06-19 15:00	diagnostics	gps_lat,gps_lon	0	Talk-through to primary GPS re-established valid data from the instrument - gps latitude and longitude variables were unflagged and are valid.
2017-06-20 00:00	aanderaa	current_speed	2	Reported current speeds are too high and erratic; data has been flagged as invalid.
2017-07-20 02:00	sbe16	ALL	52	Last data received from 52m SBE16/transmissometer
2017-09-22 16:00	sbe37	ALL	50	Last data received from 20m SBE37IM. Talk-through efforts were unsuccessful in receiving a response from the instrument.
2017-12-08 13:30	ALL	ALL		Recovered by R/V Connecticut. Heavily fouled with mussels; fishing gear entangled with wire. Gill sonic anemometer was damaged during recovery operations.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).