UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: B0127

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2015-06-04 20:53	ALL	ALL		Redeployed by R/V Connecticut.
2015-07-20 00:40	met	wind_2_speed,wind_2_gust,wind_2_direction	-4	Primary Gill wind sensor has stopped reporting good data. Wind data from the backup RMY sensor continues to be valid.
2015-09-20 09:20	met	wind_2_speed,wind_2_gust,wind_2_direction	-4	Valid data from primary Gill wind sensor is being received once again.
2015-11-20 00:00	aanderaa	current_speed	2	Current speeds becoming erratic; need to closely monitor.
2015-12-04 23:00	goes	ALL	0	Last backup Goes transmission received; primary cellphone communications working fine.
2016-01-13 00:00	sbe16	transmissivity	52	Transmissivity values starting to decrease - data questionable?
2016-02-14 10:10	met	wind_direction	-4	Backup wind direction flagged as invalid (probable icing problem with physical mount as offset is constant)
2016-07-08 01:32	ALL	ALL		recovered by R/V Connecticut

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).