UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: B0125

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
0000-00-00 00:00	aanderaa	current_speed,current_u,current_v	2	Data from 2m current meter appear somewhat questionable - will need to watch this sensor.
2013-06-20 15:45	ALL	ALL		Redeployed by R/V Connecticut.
2013-11-18 00:00	waves	ALL	00	Data from digital wave sensor stopped reporting. A few hours of data received on 2014-01-21 and 2014-04-20 but otherwise no data.
2014-02-01 00:00	sbe37	ALL	20	Data from 20m SBE37IM sensor becoming very intermittent.
2014-02-01 00:00	sbe37	ALL	50	Data from 50m SBE37IM sensor becoming very intermittent.
2014-05-11 01:00	sbe37	ALL	00	20m and 50m SBE37IMs starting to report intermittently in real-time after 3 months of silence.
2014-05-18 14:00	sbe37	ALL	00	20m and 50m SBE37IMs not reporting once again. Talk-through on port unsuccessful - only noise in response to queries from ICC.
2014-06-01 23:30	ALL	ALL		recovered by R/V Connecticut

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).