UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: A0129

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2012-10-23 12:05	ALL	ALL		Redeployed by R/V Connecticut.
2012-11-07 15:00	sbe16	dissolved_oxygen	50	Dissolved oxygen readings flagged as invalid (low and erratic) from the 50m SBE16plus.
2012-11-16 04:00	sbe16	ALL	50	Data from 50m SBE16+ becoming intermittent.
2013-01-17 08:00	sbe16	ALL	50	Last data received from 50m SBE16+ sensor (temperature, salinity, dissolved oxygen).
2013-02-09 16:30	met	wind_speed, wind_direction, wind_gust	-4	Last data received from backup wind sensor (RMYoung) which was damaged in storm.
2013-03-03 09:00	doppler	ALL	3.2	Last data received from doppler current profiler (failure cause unknown).
2013-03-08 03:00	optode	ALL	51	Last data received from Aanderaa optode and serial bridge at 51m.
2013-06-19 23:40	ALL	ALL		recovered by R/V Connecticut
2013-06-20 01:00	ALL	ALL	20	Instruments missing on this buoy when recovered include RMY49996, SBEDO430432, SBE5T053703, UMESB001, AANDO232.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).