UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: A0127

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2011-10-08 14:50	ALL	ALL		Redeployed by R/V Connecticut
2011-10-30 09:00	sbe16	dissolved_oxygen	50	Last valid 50m dissolved oxygen values received (50m tempature and salinity are okay).
2012-01-11 17:45	met	wind_speed, wind_direction, wind_gust	-4	All readings from backup (RMY) wind sensor failed.
2012-01-11 17:46	met	wind_speed, wind_direction, wind_gust	-4	All readings from primary (Gill) wind sensor failed.
2012-01-22 01:00	met	barometric_pressure	-3	Barometric pressure sensor failed (reads too low).
2012-01-22 01:00	met	visibility	-3	Visibility sensor failed (reads too low).
2012-02-05 13:30	met	wind_speed, wind_direction, wind_gust	-4	Replaced RMY wind sensor (old one had been broken off).
2012-02-05 13:30	met	barometric_pressure	-3	Replaced barometric pressure sensor.
2012-02-05 13:30	met	visibility	-3	Replaced visibility sensor.
2012-04-11 14:01	doppler	ALL	4	RDIWK ADCP reset (ensemble number back to 1). Start of averaging period minute 01.
2012-04-16 12:38	ALL	ALL		Recovered by R/V Delaware II.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).