UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: A0121

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2008-10-01 14:35	ALL	ALL		Redeployed by R/V Argo Maine.
2008-10-01 15:00	sbe37	ALL	20	20m SBE37IM failed after deployment.
2008-10-01 15:00	sbe16	ALL	20	50m SBE16+ failed after deployment.
2008-10-15 10:00	met	wind_2_speed, wind_2_gust	-4	Gill wind gust readings too high; flagged sensor as invalid.
2008-12-21 00:00	met	wind_2_speed, wind_2_gust	-4	Valid data being received from primary wind sensor.
2008-12-22 00:00	met	wind_speed, wind_gust	-4	Backup wind sensor failed (readings too low).
2009-02-12 12:53	met	wind_2_speed, wind_2_gust	-4	Revised program loaded into data logger for corrected wind speed readings.
2009-03-15 12:00	diagnostics	battery	0	Battery voltage reading over 15.5 volts for many days during October 2008. Readings were below 14.5 volts for remainer of deployment.
2009-03-20 19:28	ALL	ALL		Recovered by R/V Delaware II.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).