UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: M0124

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2014-09-18 18:04	ALL	ALL		Redeployed by R/V Connecticut.
2014-10-13 13:00	sbe37	salinity, conductivity	250	Conductivity sensor failed (reads too low) - salinity and sigma_t also flagged. Temperature/pressure okay.
2014-11-30 15:35	sbe37	ALL	1	1m SBESM reporting data once again after talkthrough to reset clock (stopped reporting data 2014-11-30 04:00).
2015-01-31 12:00	met	visibility	-3	Last valid data received from visibility sensor.
2015-04-10 00:00	sbe37	ALL	1	1m SBe37SM sensor data intermittent once again.
2015-05-21 04:00	doppler	ALL	3.2	Last data received from doppler current profiler.
2015-08-23 23:00	sbe37	ALL	20	Last data received from 20m SBE37IM.
2015-09-21 12:00	sbe37	ALL	150	Last data received from 150m SBE37IM.
2015-09-25 01:00	sbe37	ALL	100	Last data recived from 100m IM
2015-10-15 13:00	sbe37	ALL	200	Last data recived from 200m IM
2015-11-04 14:15	ALL	ALL		Recovered (for turnaround) by R/V Connecticut
2015-12-03 00:00	doppler	ALL	3.5	Instrument was found to be completely flooded.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).