UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: M0106

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2004-10-04 15:30	ALL	ALL		Mooring redeployed by R/V Argo Maine.
2005-01-19 01:00	optics_d	ALL	30	Deep optics stopped updating (sending same data every hour)
2005-01-19 10:00	aanderaa	ALL	2	Last valid data received from 2m current meter. Last buffer received 21 January at 0500z.
2005-01-19 22:00	optics_d	ALL	30	Last data received from deep optics sensors.
2005-01-23 13:00	goes	ALL	0	Last valid Goes data received from this buoy.
2005-01-25 10:00	met	wind_speed	-4	Wind speeds, gust, directions invalid.
2005-01-27 12:00	goes	ALL	0	Goes transmission have resumed.
2005-02-01 06:00	met	wind_speed	-4	Valid wind readings being received again.
2005-02-09 13:30	met	wind_speed	-4	Wind sensor replaced.
2005-02-09 14:00	aanderaa	ALL	2	External battery pack connected to 2m surface current meter. Valid data being received once again.
2005-04-09 20:00	sbe37	ALL	100	Last data received from 100m SBE37IM.
2005-04-09 20:00	sbe37	ALL	250	Last data received from 250m SBE37IM.
2005-04-09 21:00	ALL	ALL	0	Buoy moved almost 400m to SSW.
2005-05-17 22:55	ALL	ALL		M0106 was recovered by R/V Argo Maine. 100m sbe37 missing; 150/200m sbe37 drug up just below 50m sbe37. Damage to wire rope at 100m.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).