UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: F0125

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2013-06-23 01:04	ALL	ALL		Redeployed by R/V Connecticut
2013-10-08 11:00	sbe37	ALL	20	Last data received from20m IM (ICC/cable problems?)
2013-10-08 11:00	sbe37	ALL	50	Last data received from20m IM (ICC/cable problems?)
2013-10-28 14:30	ALL	ALL	0	Last data received from buoy F0125 (both cellphone and GOES).
2013-11-04 21:20	ALL	ALL	0	New program loaded into datalogger; normal operations have resumed (20m and 50m IMs also reporting).
2014-01-24 23:00	diagnostics	gps_lat, gps_lon	0	Last valid BAE GPS data received; backup GPS is sending valid positions.
2014-01-26 19:00	diagnostics	gps_lat, gps_lon	0	Valid data being received again from primary GPS.
2014-02-19 18:40	met	barometric_pressure	-3	Last valid data received from Setra barometric pressure sensor.
2014-02-23 17:30	met	barometric_pressure	-3	Barometric pressure sensor sending valid data once again.
2014-06-01 11:10	ALL	ALL		Recovered by R/V Connectictut. Heavily fouled with traps and pot warp; chain looped/knotted about 25' above anchor.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).