UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: F0121

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2009-09-17 16:05	ALL	ALL		redeplyed by R/V Argo Maine
2010-02-27 20:20	met	visibility	-3	Visibility readings too low; flagged as invalid.
2010-04-12 14:00	ALL	ALL	0	Last cellphone transmission received from this buoy. Secondary GOES transmissions continue to be okay.
2010-04-13 20:00	ALL	ALL	0	Normal cellphone transmissions have resumed; all data appear okay.
2010-05-06 21:00	aanderaa	ALL	2	Last valid data received from 2m current meter.
2010-05-14 14:00	aanderaa	ALL	2	Data being received again from 2m surface current meter (external battery added).
2010-09-26 15:00	sbe37	salinity,conductivity,sigma_t	20	Last valid data received from 20m conductivity sensor; flagged as invalid.
2010-12-09 00:00	doppler	ALL	4	Doppler current profiler battery dropping; may fail within the next week.
2010-12-28 03:00	doppler	ALL	4	Last data received from doppler current profiler (battery failed).
2011-01-04 21:15	ALL	ALL		Recovered by R/V Argo Maine.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).