UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: E0132

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2014-09-19 23:03	ALL	ALL		Redeployed by R/V Connecticut.
2015-03-21 07:00	sbe37	conductivity	1	Conductivity data invalid from 1m SBE37SM (too low, cell possibly clogged?).
2015-03-26 00:00	aanderaa	current_speed, current_u, current_v, current_direc	2	Surface current data flagged as invalid (noisy, erratic).
2015-04-17 07:00	met	wind_speed,wind_2_speed,wind_dirrection,wind_2_dir	-4	Buoy damaged - primary wind sensor failed, secondary reading low. Goes intermittent.
2015-04-21 09:00	ALL	ALL	0	Last communication from this buoy (tower damaged).
2015-06-05 22:10	ALL	ALL		Recovered by R/V Connecticut. Tower was missing; remainder of equipment was recovered intact.

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).