UMOOS Moored Buoy Sensor Information Physical Oceanography Group School of Marine Sciences University of Maine

Sensor Information for UMOOS Mooring: B0122

Mooring History:

Date	Buffer Name	Data Type	Depth	Comments
2011-10-07 22:45	ALL	ALL		Redeployed by R/V Connecticut
2011-11-04 10:50	met	air_temperature	-3	Air temperature sensor flagged as invalid (reading too high and erratic).
2011-11-14 10:10	met	visibility	-3	Visibility sensor failed (reads too low).
2012-02-22 17:05	ALL	ALL	0	Data logger program apparently became corrupted during a manual connection at 2012-02-22 17:05 and went into low-power mode (phone powered on only at 1800z, 1900z, 2000z).
2012-02-23 18:15	ALL	ALL	0	A connection was made to the data logger and program was reinitialized. Normal data collection has resumed.
2012-04-15 10:10	ALL	ALL		Recvoered by R/V Delaware II

Notes: Sensors highlighted in red indicate problems with this sensor during deployment. Depth is measured relative to the ocean surface with positive depths indicating depths below the ocean surface. Negative depths are heights above the surface. In the case of doppler current measurements, the depth indicates depth of first measurement:delta-depth:depth of last measurement. For instance, 10:4:106 represents currents measured every 4 meters from 10 meters down to 106 meters (28 depths in all).